Equal ALFA LAVAL TS6M gasket plate heat exhcanger steam heater 10/16 bar 20kg/s for HVAC steam heating

1.Gasket Plate heat exchanger 2.Application:Steam heating 3.Plate:Stainless steel AISI316 4.Gaskets:NBR / EPDM

Equal ALFA LAVAL TS6M gasket plate heat exhcanger steam heat exchanger 10/16 bar 20kg/s for HVAC steam heating

Model	SH60
Cross Reference ALFA LAVAL	TS6M
Height,  H [mm]	704	704
Width,  W [mm]	400	410
Min standard length,  L [mm]	530	540
Max standard length,  L [mm]	1430	1440
Vertical port distance,  VC [mm]	380	380
Horizontal port distance,  HC [mm]	203	203
Max temperature [°C]	180	180
Max pressure [barg]	16	20.6
Flange size	DN65/2”	DN65/2”
Max. flow rate [kg/s]	20

Material of Plate		Suited Liquid Kinds
Stainless Steel (AISI304.316 Etc)		Pure Water, Normal Water, Oil for eating, Mineral Oil
Ti, Ti-pd		Sea Water, Saline Water, Mineral Water
20Cr, 18Ni, 6Mo (254SMO)		Dilute Sulphuric Acid, Organic Water Solution
Ni		High-temp and concentration caustic soda
Hastelloy (C276, D205, B2G)		Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Material of Gasket	Operating Temperature ° C		Suited Liquid Kinds
NBR	-15~+135° C		Water, Sea Water, Mineral Oil, Salinous Water
EPDM	-25~+180° C		Hot Water, Steam, Acid, Alkali
F26	-55~+230° C		Acid, Alkali
TPF	0~+160° C		High Concentrated Acid, Alkali, High temperature Oil, Steam

  

Working principle

Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through

alternate channels. The heat is transferred through the plate between the channels, and complete counter-current

flow is reated for highest possible efficiency. The corrugation of the plates provides the passage between the plates,

supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer. 

STANDARD MATERIALS

Frame plate: Mild steel Epoxy painted

Nozzles: Carbon steel

Metal lined: Stainless steel, Titanium

Plates: Stainless steel Alloy 316 or Titanium 

A great advance on conventional PHEs 

Optimized plate design

The BS Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used

as steam heaters. The first is that when water is heated over a relatively wide temperature difference, e.g. from

10 to 70°C (50 to 158°F), the high steam velocity causes erosion and noise problems. The second is that when

high water flow rates are used when heating water only a few degrees, the PHE has to be oversized to keep the

secondary side (water) pressure drop within reasonable limits. Both of these drawbacks are now eliminated in

the new BS Series of PHEs by a unique plate geometry that allows problem-free heating over narrow and wide

temperature ranges. 

Way ahead of shell-and-tubes

No thermal fatigue Cyclic heating and cooling produces thermal fatigue in rigid steam heaters like straight

shell-and-tubes. This often results in cracked and worn components that demand maintenance and repair, thereby

causing unwanted system downtime. The combination of thin plates and flexible gaskets in the BS Series prevents

thermal fatigue by allowing the units to expand and contract in response to temperature changes. Fine temperature

control Rapid heat transfer resulting from the small hold-up volume and high surface/volume ratio of the plates

enables a fast response to temperature control.Manufacturing

Chemical processing

HVAC

Marine

Food and drink

PharmaceuticalShort delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support