Alfa Laval TS6M replacement Efficient Heat Transfer AISI316 Plates NBR Gasket Solar Heat Exchanger SH60 Series

1.Gasket Plate Heat Exchanger for solar heating 2.Plates:Stainless steel 316L/304 3.Gasket:NBR,VITON 4.Max.16bar

Alfa Laval TS6M replacement Efficient Heat Transfer AISI316 Plates NBR Gasket Plate type Solar Heat Exchanger SH60 Series

Model	SH60
Cross Reference ALFA LAVAL	TS6M
Height,  H [mm]	704	704
Width,  W [mm]	400	410
Min standard length,  L [mm]	530	540
Max standard length,  L [mm]	1430	1440
Vertical port distance,  VC [mm]	380	380
Horizontal port distance,  HC [mm]	203	203
Max temperature [°C]	180	180
Max pressure [barg]	16	20.6
Flange size	DN65/2”	DN65/2”
Max. flow rate [kg/s]	20

Material of Plate		Suited Liquid Kinds
Stainless Steel (AISI304.316 Etc)		Pure Water, Normal Water, Oil for eating, Mineral Oil
Ti, Ti-pd		Sea Water, Saline Water, Mineral Water
20Cr, 18Ni, 6Mo (254SMO)		Dilute Sulphuric Acid, Organic Water Solution
Ni		High-temp and concentration caustic soda
Hastelloy (C276, D205, B2G)		Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Material of Gasket	Operating Temperature ° C		Suited Liquid Kinds
NBR	-15~+135° C		Water, Sea Water, Mineral Oil, Salinous Water
EPDM	-25~+180° C		Hot Water, Steam, Acid, Alkali
F26	-55~+230° C		Acid, Alkali
TPF	0~+160° C		High Concentrated Acid, Alkali, High temperature Oil, Steam

Standard design

Baode frame and plate heat exchanger is No,1 China brand in plate heat exchanger industry. The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the inter plate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Working principle

Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is reated for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support